Victoria 18 Parts Availability & Spec's
Updated 06/06/99
Mail Comments/ Data/ Pictures/Suggestions to: The Victoria 18 Forum

---

If you can verify any of these Vendors of Original Victoria Parts/Accessories Please email the forum. If you have used any vendors that have supplied you with acceptable replacement parts, or are offering input to the Forum for parts to complete various projects (example: topping lift), please email the vendor(s), with a parts list to the Forum for placement on this page.

---

Original Victoria 18 Sails by :

OEM Supplier of Sails for the Victoria 18 during Manufacture
Submitted by: Dan Murzyn of the Victoria 18 Forum

OEM Tan Bark Sails for the Cutter Rigged Victoria 18

Submitted by: Missie Coley of the Victoria 18 Forum

Outboards:

Cabin Cooler:

Thermos Brand #7719 Red Cooler

http:\\www.thermos.com

09/07/2001 Thermos may still have a unit that will fit the 81-83 Model year Vics that require replacement of the cooler originally molded into the floor of the cockpit sole.

I have an email off to them.

DPV

Bimini Tops:

Option 1:
Low cost Units about $150.00
http://www.bwmarineproducts.com/contour_options.htm
Fairly light for occasional use.
Material is less expensive vinyl coated.

Option 2:
Heavier Duty Construction of either Stainless or Aluminum.
AQbout $650.00
Material is Sunbrella Fabric.
Contact Bill Cole of the Forum.

Boom and Mast:

Mast Detail Drawing . . . . . Boom Detail Drawing
DM284 Page at Dwyer . . . . DM275 Page at Dwyer

By:
Dwyer Aluminum Mast Co.
Original Equipment Manufacture for Victoria Yachts
2 Commerce Dr.
North Branford, CT. 06471
Phone: (203) 484-0419
Submitted byMike Fillimon

Sail Covers:

Boom Tent:

Arco No 6 Winches:

1981 Victoria 18 Barlow 15 Shown

Motor Mount:

Trailer:

Original Manufacture of Trailers for the Victoria 18
Magic Tilt Trailer incorporates the latest in design technology with consistent, quality construction. Each trailer undergoes numerous checks and tests to ensure years of trouble-free operation. Magic Tilt uses the best materials: galvanized steel, aircraft-quality aluminum, bunks of cypress or other treated lumber, long-lasting carpet, durable rollers, submersible light fixtures and rugged winch assemblies. These "extra" features are standard items on a Magic Tilt Trailer, giving you greater value.

Teak:

Ports:

Quad NON - Opening:

Original Supplier of Ports for the Victoria 18

 

Quad Opening:

 

Trapezoid Non-opening:

Jiffy Reefing:

Standing Rigging:

Running Rigging:

Roller bearing traveler:

Racheting Fiddle block Mainsheet Assembly:

---

Bronze replacement Hardware:

Rub Rail
(Original replacement Rub Rail for the Vic 18,17, and 26)

Tiller:

Lazarette hatch assembly: Original Replacement (OEM)

Bow Pulpit:

Stern Pulpit:

Stainless steel mast tabernackle:

Cushions:

CCushions

Portable Cooler:

Ladder:

Battery:

Many options are available for Powering your Vic. Some have used the Deep Cycle size 24 Battery and others the larger but longer lasting size 27 Deep cycle. Still others have used motorcycle batteries which are very compact and easy to remove and charge.

Newer, and much eaiser to manage are the new "Starter Cells". We have seen these units at wholesale shops like BJ's or Sams Clubs for $50.00 or less. They are Sealed units, and deep cycle.

They are typically used for emergency starting of your car, and come with cables attached for that purpose. the cables are sheathed to prevent accidental discharge. They are rated Deep Cycle Duty, and are built to take the continual charge/dischargethat we would put them through.

They come complete with a charging block that plugs into your home AC outlet. To charge the unit, just take it out of the boat and into your house and plug it in! The unit is amall, 9" wide, x 3 1/2" thick, x 10" High. They can mount anywhere, and have cigarette lighter plugs for powering a number of DC devices. Additionally, some are fused, and will protect your DC wiring. Many are less than 10lbs, and come with a handle for easy portability. I am not sure of the rating (Amp hrs), but I think they compare to motorcycle batteries based on their relative size and weight.

Other Electrical:

Brass Seacocks/ Through Hulls:

Submitted by Randi Ernst

 

On the 83;


I. Bronze Mushroom Head-Barbed 1" size, 2-1/4" Flange Part# 356446 $15.19

 

J. Bronze Mushroom Head-Barbed. 90 degree 1" size, Part# 273310 $21.99

 

But the fittings of the 79 would require a 3/4" size through
the deck Part# 356453 with a 1-7/8" Flange

 

The original plastic through hulls measurements are; 3/4" hose, 1.850"
flange, 1" thread(OD) and 1" hose, 2.350" flange, 1.300" thread(OD)

Port Hole Covers

Scupper Hose:

VHF Antenna Hardware:

500 Westbridge Dr.
Watsonville, Ca 95076
1-800-538-0775

Apelco 5160 VHF Radio----------------------------$149.50

Topping Lift Hardware:

Backstay Hardware:

Jib Dousing Hardware:

Spinnaker Hardware: